If you haven’t heard of the QEG (Quantum Energy Generator) then this is going to be a nice surprise for you. This device is based off of Tesla’s work where he built a resonance generator that required 1KW input to produce 10KW output. This device works in the same way and was built after his patents were released into the public domain. Years of testing and adjusting was done to make the device possible and available for others to build. This new device will require 1KW of input power to get the core resonance up and then after it is producing 10KW it can be unplugged and an inverter is attached so no input power will be required.
Yes, this means what it is saying, after a short period of input power, NO INPUT will be needed to supply 10KW of power. As stated by HopeGirl who released the plans open source to the public “The QEG belongs to humanity now. Many will make further improvements and we will all co-develop this practical bridge technology together.” Beautiful words as this world doesn’t need to be built off of money, greed, patents, ownership and power. These are archaic egoic concepts that we can evolve out of quite effortlessly.
How the QEG works:
First we use a starting power source, such as an outlet or a crank to power the 1 horsepower motor. This motor spins the rotor in the generator core. The unique oscillator circuitry configuration in the generator core causes resonance to occur. Once the core achieves this resonance it can produce up to 10KW of power, which can then be run through an inverter to power the motor that spins the rotor. You can then unplug the motor from the original power source and the generator will power itself.
The OpenSource for How to Build can be downloaded here
Read more here:
Status of QEG Build Morocco: Build Day 3 – Initial Resonance Achieved!