Plant nutrition and nutrient deficiency part 2

Nutrient uptake and transport

Nutrients are usually taken up by the root system. This process involves the following steps. The first requirement is mobility of the nutrients through the soil or any substrate in the rhizosphere to the roots. Then the nutrients need to pass several ‘root barriers’; the cell wall, followed by the cell membrane. The crucial steps inside the plant are the migration of the nutrients to vascular tissue (called the xylem), followed by cell to cell transport.

The shifting of nutrients through the soil depends on the several soil characteristics; pH, structure, moisture content and microbial activity. Some micro-organisms affect the rhizosphere (especially mycorrhizal fungi, which interact directly with plant roots), but most soil borne micro-organisms do not or hardly affect the rhizosphere. Micro-organisms can be beneficial (e.g. improving nutrient availability) or harmful (e.g. in competition for soil nutrients or causing root diseases). The dissolved nutrients are transported with the convective flow of water from the soil to the plant roots. This flow depends highly on the water consumption of the plant and the average nutrient concentration in the water. As we will see later in this article, water uptake by the plant and nutrient content in the substrate can be controlled easily by the grower.

A small percentage (less than 1%) of the nutrients is taken up by interception through the root tip. This interception is based on direct ion exchange, where positively or negatively charged elements are swapped (e.g. a proton (H+) from the root for a potassium ion (K+) from the substrate or nutrient solution).

Now how are the nutrients ‘in the flow’ taken up by a plant (figure 1)? The biggest barrier is usually the cell membrane which is highly selective. The basic structure of a cell membrane is the phospholipid bilayer, which has very low permeability for most nutrients. Carbon dioxide, oxygen, water and some neutral molecules like urea are the only products that can easily pass the membrane directly through the lipid layer by diffusion.

Figure 1: Schematic overview of a root (hair) cell membrane. The portals incorporated into the cell membrane are transport proteins. These transport proteins function because all essential mineral nutrients are absorbed as positively or negatively charged ions (boron being the only exception here). a ‘symport’ transports the desired nutrients and protons in the same direction. These are usually negatively charged ions such as nitrates (nO3-), phosphates (H2PO4-) and sulphates (SO42-). The ‘antiport’ transports positively charged ions in exchange for protons (H+). For instance, excess potassium ions (K+) can be moved outside the cell. as can be seen in the picture, a proton (H+) is required in both cases to facilitate the transportation process. a ‘uniport’ transports compounds, molecules or ions without known coupling to the transport of any other compound, molecule or ion. Energy (aTP) is needed to re-transport the proton outside the cell.

All other essential mineral nutrients are absorbed as ions (except boron). Therefore all nutrients (except boron) need membrane transporters. To facilitate the uptake of these nutrients, the cell membrane contains so-called transport proteins embedded in the cell membrane, controlling the intracellular environment (=the space in the plant cell). Two main mechanisms of cross-membrane movement can be identified; passive and active. Passive movement is the easy way, via carrier proteins and transport through ion channels. The active method is by ATP-ases or cotransport (Knox, Ladiges & Evans). ATP-ases are proteins that carry the ‘energy molecule’ ATP. The energy that is released by breaking down ATP is used to open or close specific transportation ports.

The driving force for passive movement is diffusion. It is selective for single nutrient molecules, requires no input of energy and has a non-linear dependence on concentration. Molecules will diffuse until the concentration is the same everywhere.

Ion channel transport can be controlled by voltage or ion concentration, even by light or hormones. Active transport requires input of energy, but nutrients can be transported against their concentration gradient.

Long distance transport

Several pathways of nutrient transport have been described in the plant. The most common one is the nutrient uptake by the root, followed by ‘long distance transport’ via the xylem vessels to the leaves and flowers (or any other plant organ). For the long distance transport two driving forces play a key role; the water potential gradient and the root pressure. Root pressure arises when osmosis drives water from the soil into the roots. Effectively because plants accumulate the nutrients taken up in the xylem tissue.

Factors that influence nutrient uptake

There are intrinsic and environmental factors which affect the nutrient uptake. Charge and ion diameter are intrinsic factors. Environmental factors are light, temperature, water, O2, pH, concentration and interaction between nutrients. The uptake often increases in the following order; uncharged molecules are taken up better than monovalent cations and anions, followed by bivalent cations and anions (Marschner, 2011).

The nutrient uptake is pH dependent, but not every nutrient is equally affected. In most cases there is an optimum and too high and too low pH levels decrease the nutrient uptake. The root zone pH influences the charge of the root surface which is slightly negative. Most nutrients are plant available in the pH range 5.5-6.5. Light is a source of driving forces, therefore there are diurnal fluctuations in nutrient uptake. Like pH also temperature has an optimum level, too high and too low temperatures decreases nutrient uptake.

Temperature is a driving force for evaporation of plants, opening stomata and the root zone temperature depend the nutrient uptake. Water is important, because, except for interception, nutrients are transferring through mass flow and diffusion, all of which are dissolved in the soil solution. It is important to maintain a suitable soil water content (60-80% field water holding capacity) for optimal growth of plants. Oxygen will limit plant growth in poorly aerated substrates (Hopkins, 1950). The higher the nutrient concentration the higher the uptake rate, the increase slows down at very high concentrations. Interaction between ions can be antagonism (competition) or synergism. In the first case one ion inhibits the absorption of another ion. And in the second case one ion enhances the absorption of another ion.

Competition can be between cation versus cation, anion versus anion, the same charge and different charge. A single salt resulting in plant poisoning is called toxicity of a single salt (KCl, CaCl). Ion antagonism is referred as the interaction among ions can limit the toxicity of a single salt (NaCl+KCl+CaCl2 or NaCl+CaCl2). Synergism is that anions promote cation uptake and divalent cations promote mono-charged cations (Ca2+ promotes the uptake of K- and Cl-).

Fertilization of crops

The uptake of nutrients is facilitated by cell membrane bound protein transporters membrane transporters. Synthesis of transporters responds to nutrient deficiency and toxicity. Nutrient transporters behave like enzymes. Transport can be driven by concentration and electrical gradient (passive transport) and metabolic energy (active transport).

The quality of the crop, or the fertilization success of crops depend on a phenomenon, which can be shortly explained by the following theory. The barrel theory (or the law of minimum) is about the crop yield which is limited by the most deficient nutrient, and the limited nutrient is changeable. This concept was originally applied to plant or crop growth, where it was found that increasing the amount of plentiful nutrients did not increase plant growth. Only by increasing the amount of the limiting nutrient (the one most scarce in relation to ‘need’) was the growth of a plant or crop improved (see figure 2).

Figure 2: an overview of the barrel concept (the ‘law of the minimum’). This theory relates to crop yield, and states that the yield is limited by the nutrient which is the most deficient; this could be any one of the nutrients shown. according to this image, the growth of a plant or crop can only be improved by increasing the amount of this ‘limiting’ nutrient.

There is also absorption of mineral nutrients by the leaves. Foliar nutrition is a method in which the fertilizer is applied to plant shoot, usually to leaves. The advantage of foliar nutrition is that the supply and uptake of nutrients is effective and fast, because the usual lag period between root uptake and vessel transportation towards the plant organs is cut out. Furthermore, the nutrients applied have a higher utilization rate. Leaf fertilizers are usually a supplement way to compensate macronutrient deficiency such as nitrogen and magnesium, but also effective against micronutrient deficiencies such as iron.

The concentration which can be applied is not too high. The nutrients need to remain on the leaf surface, preferably in a thin film. Therefore, the mixture of nutrients should be applied together with a surfactant. Spraying is recommended only in the evening or on a cloudy day to prevent burn marks.

Read the full article and part one at CannaGardening